Magnets? Is it an opportunity?

In September, The Monty published this article. https://themonty.com/vacuum-furnace-sales-spiked-by-rare-earth-magnet-industry/. One might assume that the downturn in the automotive sector would make it difficult for ECM to find space for its multi-chamber LPC equipment; however, the opposite is true. The production hall remains packed with new machinery—though this time, the equipment is for magnet processing lines.
What is the outlook for this sector? If this infographic is to be believed, it is likely very promising. It is not just that the number of applications is growing; there is also an effort to shift production from Asia back to Europe or the USA. Essentially, this is a strategic product; without it, mobile phones, electric cars, aircraft, and even tanks would not function.
Marco Baretti confirms exactly this—writing again in The Monty on May 15, 2025: https://themonty.com/rare-earth-materials-vacuum-heat-treating/
As Marco notes, the production of these advanced NdFeB or CoSm magnets often involves sophisticated heat treatment techniques, including annealing and sintering in vacuum furnaces. Vacuum furnaces provide a controlled, oxygen-free environment that is essential for achieving the desired microstructures and magnetic properties of rare-earth magnets.
Sintering: This process involves compacting fine rare-earth alloy powders and heating them to a high temperature below their melting point. Inside the vacuum furnace, the powder particles bond together to form a dense, solid magnet with enhanced magnetic properties. The absence of oxygen during sintering is crucial to prevent the formation of unwanted oxides, which can degrade magnetic properties.
Annealing: This heat treatment process is used to smooth grain boundaries in order to decouple magnetic domains in adjacent grains. Additionally, a lower-temperature annealing step is required to relieve internal stresses in the sintered magnets and maximize coercivity.
Temperature profiles for NdFeB magnets on the left, and for CoSm on the right.
There are essentially two technologies for their production: powder sintering or bonding. For sintered parts, the process flow is roughly
NdFeB alloy → powder → magnetic alignment → pressing → vacuum sintering → heat treatment → machining → coating → magnetization
For bonding—an analogue to MIM technology—it is as follows:
NdFeB magnetic powder + polymer binder → mixing → molding/pressing → curing/cooling → magnetization
The first technology requires vacuum furnaces, while the second usually does not.
And what about Co-Sm magnets? There are essentially two types:
- SmCo₅ — 1:5 type
- Sm₂Co₁₇ — 2:17 type
Typical manufacturing process for sintering:
Alloy melting → crushing / milling → magnetic alignment → pressing → sintering → solution treatment / annealing → aging → machining → magnetization
And for bonding:
SmCo powder + polymer binder → mixing → pressing/injection molding → curing / cooling → magnetization
And what is the difference between the TAV and ECM strategies? This graphic illustrates it. While ECM focuses on parallel processes and high production efficiency, TAV prioritizes customer-oriented solutions.
And how will things unfold in the Czech Republic and Slovakia? Neither country possesses its own Rare Earth Element (REE) resources. However, the Slovak government has already included this in its policy agenda, and VacuumSchmelze—a magnet manufacturer—is already established there; the Czech Republic, meanwhile, has so far focused only on lithium and manganese. Yet, surprisingly, the EU has already taken a crucial step in this regard by issuing document COM(2025) 945 final: *EU Action Plan: Accelerating our critical raw materials strategy to adapt to a new reality*. It envisages funding, supplier-customer matchmaking, support for offtake agreements, recycling, and measures to reduce reliance on single sources. The EIB is set to provide up to €2 billion annually for critical raw material projects, with additional funding coming from programs such as the Innovation Fund, Horizon, and the EIC.
So, there is plenty to look forward to.
=======================================================================================================
Are you solving a similar problem? I will help you with the analysis…
40+ years of experience in the field
30+ years of experience… HT-PROGRES, Bodycote, Galvamet
cooperation… VŠB, Czechimplant, ECM Technologies, TAV Vacuum Furnaces, GHC Invest
12+ years of expert activity
Want to ask for a solution or want a non-binding consultation? Click on this link, I will usually respond within 24 hours. Contact email
========================================================================================================
Jiří Stanislav, Ing. CSc.
Consultant and forensic expert
========================================================================================================
7/10/2026











